2010 Mercury Milan Used Transmission AT – 86,953 miles

Owners and repair shops searching for a dependable transmission for a 2010 Mercury Milan will find a solid option here: a used automatic transmission with 86,953 miles, priced at $990. This page lays out the details that matter, including configuration, testing, protection, shipping, and installation advice, so you can order with confidence.

Product Summary

• Vehicle: 2010 Mercury Milan
• Part: Used Transmission
• SKU: ETO_12385
• Configuration: AT 2.5L ? VIN 3 (8th digit ? Hybrid) ? ID 9E58-AE thru AJ
• Type: Automatic (AT)
• Engine pairing: 2.5L
• VIN code: 3 (VIN position 8)
• Mileage: 86,953 miles
• Warranty: 6-month, parts and freight
• Price: $990 (MRP $1,148; you save $158, about 14%)

About This Used Transmission

A healthy transmission shifts cleanly, holds gear under load, and does not slip, shudder, or leak. When a unit begins to fail you may notice delayed engagement, harsh shifts, grinding noises, or a warning light. A correct replacement automatic transmission for the 2010 Mercury Milan is often far more economical than replacing the whole vehicle. Automatic units depend on clean fluid, a healthy torque converter, and correct hydraulic and electronic control, so plan to replace the fluid and inspect the cooler lines during the swap.

Understanding the Mileage

This transmission shows 86,953 miles, which is in a moderate range. Modern units are engineered to last well beyond this point when maintained, which makes this range a good balance of price and remaining life. Mileage is a guide rather than a guarantee, so read it together with the testing results and warranty terms below.

Testing and Condition

The record for this unit shows it has been through a shift test, a run test and a leak inspection. These checks are meant to confirm that the transmission operates correctly and is not leaking before it ever reaches your shop. Even with good test results, a used part should always be inspected on arrival. Check the casting for damage, confirm that the mounting surfaces are clean and flat, and compare the part with your original before it goes in the vehicle.

Warranty and Protection

This transmission comes with a 6-month warranty covering parts and freight. Extended coverage is also available: up to 3 years of extended warranty is available. Returns are accepted under a 30-day free-returns policy. Refunds are backed by a 100% money-back guarantee. Keep your invoice and records handy, follow the installation requirements in the warranty terms, and use fresh fluids and new wear items so any claim stays simple.

Compatibility and Fitment

Confirm fitment before you buy by checking your VIN against the specification on this page. For this listing, compare the VIN code 3 at position 8 with your vehicle. The 2010 Mercury Milan may have been built with more than one transmission option in the same model year, so confirm details such as drivetrain and emissions rules for your state.

Shipping and Delivery

This unit ships by palletized freight, which keeps a heavy transmission secure during transit. Shipping is listed as FREE ? Nationwide. Preparation and handling takes 3?5 business days. Transit time is listed as 2?3 business days. Tracking is provided. Photo approval is part of the process, so you see the unit before it ships. Plan for a lift gate or forklift at delivery, inspect the pallet and packaging before signing, and note any damage on the delivery paperwork right away.

Installation Tips

Plan the installation carefully. Replace the rear main seal or output seals as appropriate, inspect the mounts, and flush the transmission cooler and lines so debris does not contaminate the new unit. Use the fluid type specified for the 2010 Mercury Milan, fill to the correct level, and check for leaks after a short test drive. Have the vehicle serviced by a qualified technician if you are not experienced with drivetrain work, because correct alignment and torque specifications matter.

Why Choose a Used Part

A used transmission costs far less than a new factory unit and is built to the vehicle's original specification. For an older vehicle like a 2010 Mercury Milan, that difference often decides whether a repair makes financial sense. Original parts tend to fit better than low-cost substitutes, and reusing a part keeps it out of the scrap stream. This unit is listed at $990 against an MRP of $1,148, a saving of $158.

Care After Installation

After installation, check the fluid level and condition after the first few drives, and change it early if it looks dark or smells burnt. Avoid towing heavy loads or aggressive driving while the unit settles in. Follow your owner's manual for fluid type and service interval, and address slipping, delayed engagement, or leaks right away. Regular fluid service is the best way to extend transmission life.

Frequently Asked Questions

Will this transmission fit my 2010 Mercury Milan?

It is listed for the 2010 Mercury Milan. Confirm with your VIN and the specification above.

How many miles does it have?

The listing shows 86,953 miles.

What warranty applies?

A 6-month warranty covering parts and freight. Extended coverage: up to 3 years of extended warranty is available.

Can I return it?

Yes, under a 30-day free-returns policy. Refunds are backed by a 100% money-back guarantee.

How is it shipped?

By palletized freight, with FREE ? Nationwide, and tracking is provided.

Should I replace other parts during the swap?

Yes. Replacing seals, cooler lines, and the clutch where applicable while everything is apart saves labor and lowers the chance of a repeat repair.

If you are ready to get your 2010 Mercury Milan running again, this used automatic transmission with 86,953 miles is a practical choice. Confirm fitment with your VIN, review the testing and warranty details above, and install it with fresh fluids and wear items so the repair lasts.